Foundry

We manufacture and supply Ferrous and Non-ferrous castings made at fully-automated/ semi-automated foundries located in India. The parts are manufactured as per customer specification. We meet International standards such as ASTM, AISI, BS, DIN, and JIS. Our foundries can produce parts weighing from 0.100 Kg to 1000 Kgs as a single piece.

We use the below manufacturing processes:

  Green Sand
  Furan Resin / No Bake
  Co2 / Floor Mould

  Shell / Resin
  Lost Wax

  Gravity Die
  Pressure Die

Process Moulding Line Material Grade Capability
Green Sand
  •   DISA
  •   ARPA
  •   IMF
  •   Gray iron
  •   Ductile Iron
  •   Ni-resist Iron
  •   Alloy Steel
  •   Mould size (max) : 1m x 1m
  •   Weight Range : 1 Kg ~ 30 Kgs
  •   Dimensional Tolerance +/- 2.5mm
  •   Surface finish up to Ra 12.5
Furan Resin / No Bake
  •   DISA
  •   ARPA
  •   IMF
  •   Gray iron
  •   Ductile Iron
  •   Ni-resist Iron
  •   Alloy Steel
  •   Mould size (max) : 1.5m x 1.5m
  •   Weight Range : 30 Kg ~ 150 Kgs
  •   Dimensional Tolerance +/- 2 mm
  •   Surface finish up to Ra 6.3
Co2 / Floor Mould
  •   IMF
  •   SPM’s
  •   Gray iron
  •   Ductile Iron
  •   Ni-resist Iron
  •   Alloy Steel
  •   Carbon Steel
  •   Mould size (max) : 3m x 3m
  •   Weight Range : 100 Kg ~ 1000 Kgs
  •   Dimensional Tolerance +/- 2.5mm
  •   Surface finish up to Ra 6.3
Shell / Resin
  •   SPM’s
  •   Gray iron
  •   Ductile Iron
  •   Ni-resist Iron
  •   Alloy Steel
  •   Carbon Steel
  •   Mould size (max) : 500mm x 500 mm
  •   Weight Range : 0.250 Kg ~ 20 Kgs
  •   Dimensional Tolerance +/- 0.75mm
  •   Surface finish up to Ra 3.2
Lost Wax
  •   SPM’s
  •   Gray iron
  •   Alloy Steel
  •   Stainless Steel
  •   Carbon Steel
  •   Aluminum
  •   Mould size (max) : 500mm x 500mm
  •   Weight Range : 0.100 Kg ~ 20 Kgs
  •   Dimensional Tolerance +/- 0.06 mm
  •   Surface finish up to Ra 1.6
Gravity Die
  •   SPM’s
  •   Aluminum
  •   Bronze
  •   Brass
  •   Mould size (max) : 1m x 1m
  •   Weight Range : 0.5 Kg ~ 50 Kgs
  •   Dimensional Tolerance +/- 0.4 mm
  •   Surface finish up to Ra 3.2